Sandblasting room sent to New Zealand

  • Time of issue:2021-12-14
  • Views:

Sandblasting room sent to New Zealand

(Summary description)

  • Time of issue:2021-12-14
  • Views:92

Today, the production and commissioning of the glass bead sand blasting room customized by our New Zealand customer has been completed and is being packed and shipped.

We learned from the customers description that this sandblasting room is mainly used to clean stainless steel and carbon steel. The stainless steel workpieces that have been sandblasted will be used in the auto repair industry.


The size of the sandblasting room is 7m×4m×4m. According to the customer's request, we made the blue room body. It is composed of two scrapers and a set of spirals. The scraper design is convenient for maintenance and high work efficiency. . Due to the relatively large workpieces to be cleaned, we have equipped the blasting room with two sets of blasting tanks, which can satisfy two people working in the blasting room at the same time, which improves the work efficiency. In order to ensure the safety of operation, we use remote control to control the sandblasting tank to reduce the occurrence of safety hazards.


Sand blasting room is also called shot blasting room and sand blasting room. It is suitable for surface cleaning and rust removal of some large workpieces, and increases the adhesion effect between the workpiece and the coating. According to the recycling method of the shot material in the sand blasting room, the sand blasting room is divided into They are: mechanical recovery type blasting room and manual recovery type blasting room; the main feature of the blasting room is that the operator is indoors during the blasting process. The protective clothing and helmet can prevent the operator from being impacted by abrasives, and the ventilation device provides fresh air to the operator through the helmet.


The sandblasting room adopts pressure-in sandblasting processing, that is, the pressure, flow rate and flow of compressed air are used to spray sand onto the metal surface. When the blasting room is working, the compressed air and sand in the container are mixed while spraying, so that the compressed air can be fully utilized, the air flow and the sand flow are easy to adjust, and the ideal mixing ratio, energy and sand can be obtained. Low consumption, high research and sweeping efficiency, suitable for large-area cleaning and rust removal of metal surfaces in shipbuilding, aircraft, rolling stock, bridges, and chemical industries.


In the sandblasting room, where there are transmission parts, there are shields and safety warning signs, warning paint colors, and emergency stop buttons are designed for the operating position and maintenance platform, and the equipment for blasting, blasting (sand) blasting, and maintenance are all safe Interlocking, the sand blasting room is equipped with a projectile recovery belt conveyor to prevent accidents caused by the scattered projectiles, and the sand blasting room is equipped with emergency lights for power failure, and the automatic walking workbench is safe to limit.


The sandblasting room uses a low-power motor to complete the high-efficiency and automatic recovery of large-area floor abrasives, which greatly reduces power consumption and reduces use costs. When the abrasive is recycled, only the high wear-resistant polyurethane blade is in contact with the abrasive, without any friction with any other parts, and it is recycled slowly and evenly, thus completely eliminating the secondary crushing loss of the abrasive during the floor recycling. The wear of the floor structure is reduced to close to zero, thereby saving abrasives and greatly extending the service life of the floor, greatly reducing the cost of use.










Scan the QR code to read on your phone

ADD:750 meters west of Yinzhu Exit of Shugang Expressway, Qingdao City, Shandong Province



Scan to add WeChat public account