Daily maintenance of hook shot blasting machine:

1. Turn on the hook type shot blasting machine. Before starting, connect the compressed air to the air tank, connect the control power supply and the ash discharge device. If there are other equipment in the system, pay attention to starting the downstream equipment first. ；

2. During normal work, the relevant operators should be very familiar with the performance and use conditions of the equipment, and master the conventional methods of adjustment and maintenance, and also pay attention to the ash discharge device not to stop working to avoid the accumulation of dust inside. Equipment stops working;

3. Regular inspection is very important. It is necessary to regularly measure the relevant parameters of the product, such as flue gas volume, temperature, concentration, etc., and regularly check the working conditions of the pressure switch. For components such as reducers and ash conveying devices, oil and Oil change

4. When the equipment is shut down, the exhaust fan should continue to work for a period of time after the system is stopped, and the dust should be cleaned. When shutting down, do not cut off the air source and make sure that the lift valve is in an open state.