POVAL

NEWS

How does the shot blasting machine manufacturer extend the service life of the shot blasting machine

  • Time of issue:2021-09-28
  • Views:

How does the shot blasting machine manufacturer extend the service life of the shot blasting machine

(Summary description)

  • Time of issue:2021-09-28
  • Views:736
Information

1. Check if there is any debris falling into the machine, and clear it in time to prevent blockage of each conveying link and cause equipment failure.

2. Check whether the screws of the shot blasting machine accessories are tightened before work.

3. Before operation, check the wear of vulnerable parts such as guard plates, blades, impellers, rubber curtains, directional sleeves, rollers, etc. twice every shift, and replace them in time.

4. Check the coordination of the moving parts of the electrical appliances, whether the bolt connections are loose, and tighten them in time.

5. The oil injection point of the shot blasting machine equipment shall be regularly checked whether the oil injection of the prepared part meets the requirements.


Generally speaking, the vulnerable parts and wear-resistant parts of the shot blasting machine are made of high-chromium wear-resistant cast iron. In terms of service life, the service life of the blade is more than 500 hours, the service life of the side plate and top plate is at least 800 hours, the service life of the end plate is 1200 hours, and the service life of the directional sleeve pill wheel is 1800 hours. There is no problem with the protective plate in one year. Some shot blasting machine equipment is still in good condition even after more than 2 years of use, and some shot blasting machine parts are severely worn after 3 or 4 months of use.

In addition, in a high temperature and high humidity environment, the motor, blades, reducer, etc. are prone to heat when the shot blasting machine is used. The temperature of the air itself is high, and it is difficult for the shot blasting machine accessories to dissipate heat. Working under this condition for a long time will cause the consumption of the accessories. Increased exponentially. Since the shot blasting machine itself is in a humid, rainy and sultry environment, the electrical components of the shot blasting machine will be seriously aging and easy to short-circuit, which requires special attention. The steel grit used in the shot blasting machine is easy to rust in a humid environment, and the rusty steel grit is easy to damage the spiral and lifting belt of the shot blasting machine during use.

For frequently used equipment, the amount of lubricant is too large. When using a through-type shot blasting machine, pay attention to timely replenishment of lubricant. This is a problem that many people ignore when using it. Lubricant is a good maintenance product and also a kind of information that can make equipment run better. Therefore, it is necessary to add lubricant frequently to ensure that the equipment can be used for a longer time.

 

 

Scan the QR code to read on your phone

ADD:750 meters west of Yinzhu Exit of Shugang Expressway, Qingdao City, Shandong Province

E-mail:info@puhuazg.com

公众号

Scan to add WeChat public account