The working process of the automobile rear axle shot blasting machine is similar to that of the ordinary model shot blasting machine. When the equipment starts to work, the door of the chamber body is opened. In the feeding area, the rear axle of the automobile is placed on the feeding trolley by a crane and the trolley table is The axle is lifted, and then the loading trolley automatically sends the axle to the clamping mechanism in the cleaning chamber. The cylinders of the clamping mechanism on both sides of the chamber push the tapered jaws to move to the middle at the same time, and the axle is firmly stuck.
Then the loading trolley table is lowered and exits the cleaning room, the door of the chamber body is closed, the clamping rotation mechanism is driven by the reducer and rotates with the axle at the same time the shot blasting device is opened, the shot blasting tank is opened, and the inner and outer surfaces of the axle are cleaned simultaneously; After cleaning, the autobiography mechanism stops, the door of the chamber body is opened, the unloading trolley enters the designated position of the chamber body, the cylinder of the clamping mechanism pushes the tapered jaws to move to both sides, and the axle is placed on the unloading trolley to take out the chamber body and discharge the material , The feeding trolley repeats the above actions for the next working cycle.