Installation steps of steel plate through shot blasting machine:
1. General assembly: People who have installed or assembled objects should know that the installation of the machine should first assemble the general parts together, and then install the small parts, as is the case with the through shot blasting machine. Therefore, the shot blasting machine, dust remover and other important parts shall be assembled together.
2. Installation of projectile equipment: after the general parts are assembled, the projectile equipment is installed. The machine that provides and splits projectiles is installed on the separator, and you can prepare your own tools to receive the separated objects, and then recycle or dispose of them.
3. Foundation work: first of all, the foundation shall be selected during installation, that is to say, the installation position of the machine shall be kept flat, and the installation can be started after confirming the orientation of the machine.
4. Adjustment of working parts: After assembly, another step is to debug to see whether the machine can be used normally. Under normal conditions, the shot thrown should be uniform without gaps, so as to ensure the high efficiency of work. Therefore, if the shot flows unevenly, you can manually adjust the hammer and separation plate until the uniform shot can be separated.
What should be paid attention to during the installation of steel plate through shot blasting machine?
1、 Pay attention to the angle. When installing the steel plate through shot blasting machine, install it according to the instructions. The installation is reliable. Pay attention to ensuring the normal operation of the steel plate shot blasting machine in the installation sequence and angle.
2、 Pay attention to the installation sequence. The order of installing the steel plate through shot blasting machine is very important. Because there are many such equipment parts, it is also necessary to put these parts in the correct position, which is a matter to do. Because if the equipment is installed in the correct order, it will have a great impact in use. Correct operation is a big problem. The use of natural equipment is not very good, so it should be noted that, If the installation is not as important as the professional technicians, they will carefully look at the specifications, so that the installation can be better and the use effect will be better.